Maintenance Management - 2

LIST OF ATTEMPTED QUESTIONS AND ANSWERS



True/False
Question
Value analysis is one way to attempt for quality simplification.
Correct Answer
True
Your Answer
False

True/False
Question
The lead time to take the decision is same in private sector companies and government controlled organizations.
Correct Answer
False
Your Answer
False

Multiple Choice Single Answer
Question
Installation & commissioning of a new plant is :-
Correct Answer
Single contract tasks
Your Answer
Single contract tasks

Multiple Choice Single Answer
Question
Who has to prepare training manuals?
Correct Answer
Maintenance Manager
Your Answer
Maintenance Manager

Multiple Choice Multiple Answer
Question
The price of the spare part depends on :-
Correct Answer
Demand and supply position , Urgency of buyer , Level of negotiations
Your Answer
Demand and supply position , Urgency of buyer , Level of negotiations

True/False
Question
Any equipment can be dismantled easily without the help of special tools.
Correct Answer
False
Your Answer
False

Match The Following
Question
Correct Answer
Your Answer
Time taken
As low as possible
As low as possible
Automation
Decrease break down time
Decrease break down time
Utilization of machine
As high as possible
As high as possible
Equipment selection
Purchase dept
Purchase dept

True/False
Question
The hazardous chemicals are divided into 90 groups in decreasing order of hazard.
Correct Answer
False
Your Answer
False

Multiple Choice Multiple Answer
Question
The objective inventory control is :-
Correct Answer
To reduce lead time , To reduce finance cost of inventory , To reduce storage cost of material
Your Answer
To reduce lead time , To reduce finance cost of inventory , To reduce storage cost of material

True/False
Question
Proper communication with related departments can result in increased cost of spare.
Correct Answer
False
Your Answer
False

Multiple Choice Single Answer
Question
The leakage should be monitored by device known as :-
Correct Answer
Leakage detector
Your Answer
Leakage detector

Select The Blank
Question
It is right of an inspector to get help of ________ at any time.
Correct Answer
Higher Authorities
Your Answer
Higher Authorities

Multiple Choice Single Answer
Question
What is the lower limit of the ratio of emergency maintenance to total maintenance time?
Correct Answer
Less then 25 %
Your Answer
Less then 10 %

Multiple Choice Multiple Answer
Question
High quality of workmanship helps maintenance people :-
Correct Answer
For boosting Morale of Maintenance People , In Identification of efficient workers , Rewarding Efficient Workers
Your Answer
For boosting Morale of Maintenance People , In Identification of efficient workers , Rewarding Efficient Workers

Multiple Choice Single Answer
Question
Proper spare part will enhance the life of equipment and will save vital :-
Correct Answer
Capital expenditure
Your Answer
Capital expenditure

Multiple Choice Multiple Answer
Question
With "vendor supplies equipments" what Vendor is suppose to supply?
Correct Answer
Drawings of equipments , Drawings of electrical connection , Views of equipment
Your Answer
Micro films , Drawings of equipments , Views of equipment

Select The Blank
Question
Availability of ________ equipment is considered while deciding maintenance system.
Correct Answer
Stand by
Your Answer
Non-Critical

Multiple Choice Multiple Answer
Question
Which of the following are diagnostics instrument which are used in maintenance management?
Correct Answer
Time Tester , Safety checker for portable electrical tools , Temperature Sensitive Crayons
Your Answer
Safety checker for portable electrical tools , Temperature Sensitive Crayons , Heat Flow sensors

True/False
Question
Computers can be used to predict failures and breakdowns by simulation method well in advance.
Correct Answer
True
Your Answer
True

Multiple Choice Multiple Answer
Question
Maintenance Control system is used to check following?
Correct Answer
Correct starting time of Maintenance activities , Maintenance planning , To get correct feedback
Your Answer
Correct starting time of Maintenance activities , Maintenance planning , To get correct feedback

Multiple Choice Multiple Answer
Question
Following equipment must be tested for correct load bearing capacity :-
Correct Answer
Scaffolding , Ladder , Platform
Your Answer
Scaffolding , Ladder , Platform

Multiple Choice Single Answer
Question
The modern management is composed of evaluation, refinement and integration of functional objectives into an :-
Correct Answer
Integrated corporate goal
Your Answer
Integrated corporate goal

Multiple Choice Single Answer
Question
To ensure high efficiency & Productivity in the maintenance work, the most important thing is :-
Correct Answer
Complete Technical Control
Your Answer
Equipment Management

Multiple Choice Multiple Answer
Question
The 5 S' are related to :-
Correct Answer
Orderliness , Tideness , Purity
Your Answer
Orderliness , Tideness , Purity

Multiple Choice Single Answer
Question
If equipment creates noise above permissible level then :-
Correct Answer
It may produce vibration which may affect other equipment.
Your Answer
It is recommended not to purchase such equipment.

Multiple Choice Single Answer
Question
What is a necessary thing, if management expects workers must do maintenance effectively?
Correct Answer
Training
Your Answer
Training

Multiple Choice Multiple Answer
Question
Where CPM can be used?
Correct Answer
In Construction Business , In Research & Development Projects , Launching new products in Marketing
Your Answer
In Construction Business , In Research & Development Projects , Launching new products in Marketing

True/False
Question
The schedule of lubrication of equipment is not a part of maintenance plan.
Correct Answer
False
Your Answer
False

Multiple Choice Single Answer
Question
When the running machine is making sound what is to be done?
Correct Answer
Locate the noise
Your Answer
Stop the machine

True/False
Question
Chart when prepared uses ' half split' method of fault diagnosis.
Correct Answer
True
Your Answer
True

Multiple Choice Multiple Answer
Question
Water as a fire extinguisher can be applied which is in the form of :-
Correct Answer
Solid stream , Fine spray , Foam
Your Answer
Fine spray , Foam

Multiple Choice Single Answer
Question
Automation of machines is mainly done for :-
Correct Answer
Detecting the failures and save time
Your Answer
Detecting the failures and save time

Select The Blank
Question
________ is the period that elapses between the recognition of the need of spare parts and its fulfillment.
Correct Answer
Lead time
Your Answer
Lead time

Select The Blank
Question
________ are used to monitor the conditions of parts subject to strains due to vibrations in operating conditions.
Correct Answer
Strain Gages
Your Answer
Strain Gages

Multiple Choice Multiple Answer
Question
What is VEN in VEIN analysis?
Correct Answer
Time , Technology
Your Answer
Natural , Time , Technology

Select The Blank
Question
One of the main jobs of ________ is to train the subordinates.
Correct Answer
Supervisor
Your Answer
Supervisor

Match The Following
Question
Correct Answer
Your Answer
Factory building
Cross ventilation
Cross ventilation
Foreign origin equipment
Manual translation into English
Manual translation into English
Non standard spare parts
Maximum lead time
Maximum lead time
Steam piping
Proper Insulation
Proper Insulation

Select The Blank
Question
Quality should not be ________ at the cost of lower price.
Correct Answer
Sacrificed
Your Answer
Sacrificed

Multiple Choice Multiple Answer
Question
What may be the result of too many levels of authority?
Correct Answer
Overlapping of duties , Confusion , No work done
Your Answer
Overlapping of duties , Confusion , No work done

True/False
Question
Some equipments are patented so manufacturing of spares is possible.
Correct Answer
False
Your Answer
False

True/False
Question
Oil pump is lubricating equipment.
Correct Answer
True
Your Answer
False

Select The Blank
Question
Adequate ________ should be provided in the design of the equipment to prevent any mishap.
Correct Answer
Interlocks, safety alarms
Your Answer
Interlocks, safety alarms

Select The Blank
Question
To achieve high reliability we should select ________.
Correct Answer
Trouble free operation machine
Your Answer
Trouble free operation machine

Select The Blank
Question
________ is schedule of overhaul & schedule of calibrating the equipment.
Correct Answer
Maintenance schedule
Your Answer
Maintenance schedule

Select The Blank
Question
The wear out portion has ________ failure rates.
Correct Answer
Highest
Your Answer
Highest

Select The Blank
Question
The spark can be generated due to ________ faults.
Correct Answer
Phase to phase
Your Answer
Ignitions

Multiple Choice Single Answer
Question
What is necessary under good house keeping to avoid sparks & ignition?
Correct Answer
Well designed equipments
Your Answer
Well designed equipments

Maintenance Management - 1

LIST OF ATTEMPTED QUESTIONS AND ANSWERS

Question Which of the following of the main qualities of lubricant?
Answer Viscosity , Antiwear property , Alkalinity
Your Answer
Alkalinity , Viscosity , Antiwear property

Select The Blank
Question
________ & maintenance department are closely interlinked to each other.
Correct Answer
Production
Your Answer
Production

Select The Blank
Question
Quality should not be ________ at the cost of lower price.
Correct Answer
Sacrificed
Your Answer
Sacrificed

Multiple Choice Multiple Answer
Question
In the objective evaluation method, the performance indicators are :-
Correct Answer
Spare part ratio , Overtime ratio , Availability of plant ratio
Your Answer
Working capital ratio , Spare part ratio , Overtime ratio

True/False
Question
Shelves, Closets such fittings are consider as costing centers for buildings in the assets register.
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer
Question
There could be leakage of air from system due to wrong setting of :-
Correct Answer
Safety valve
Your Answer
Safety valve

Multiple Choice Single Answer
Question
The planned maintenance is carried out :-
Correct Answer
As per manufacturers recommendations
Your Answer
As per manufacturers recommendations

Select The Blank
Question
Time required to diagnose is about ________ percent to total down time.
Correct Answer
40-80
Your Answer
60-70

Select The Blank
Question
________ should be planned so that workers can approach the equipment easily.
Correct Answer
Gangways
Your Answer
Subways

Multiple Choice Single Answer
Question
Which activity is known as great helper for in avoiding unscheduled breakdowns?
Correct Answer
Inspection activity
Your Answer
Upgradation of System

Multiple Choice Multiple Answer
Question
Cost control can be achieved by :-
Correct Answer
Establishment of optimum conditions , Measurement of variation from optimum , Taking corrective action
Your Answer
Establishment of optimum conditions , Measurement of variation from optimum , Taking corrective action

True/False
Question
Spare parts are also stored to cater to emergency events like strike of transporters, strike at the supplier workshop, flood, Heavy rain etc.
Correct Answer
True
Your Answer
True

True/False
Question
Chart when prepared uses ' half split' method of fault diagnosis.
Correct Answer
True
Your Answer
False

Multiple Choice Multiple Answer
Question
Which are probable period of annual shut Downs in the Year?
Correct Answer
Demand for a product is Low , Festival Seasons , Supply of Raw material is nil.
Your Answer
Demand for a product is High , Festival Seasons , Supply of Raw material is nil.

Select The Blank
Question
Maintenance department's ________ shows low performance.
Correct Answer
High cost
Your Answer
High cost

Multiple Choice Multiple Answer
Question
Fire can be extinguished by?
Correct Answer
Taking away heat , Stopping oxygen , Chemical extinguishing
Your Answer
Taking away heat , Stopping oxygen , Chemical extinguishing

Multiple Choice Single Answer
Question
As the frequency of maintenance is stepped up preventive maintenance cost :-
Correct Answer
Shoots up
Your Answer
Shoots up

True/False
Question
It is said that budgetary process is more a test of implementation skill then anything else.
Correct Answer
False
Your Answer
True

Multiple Choice Multiple Answer
Question
Maintenance Control system is used to check following?
Correct Answer
Maintenance planning , To get correct feedback , Correct starting time of Maintenance activities
Your Answer
Correct starting time of Maintenance activities , Maintenance planning , To get correct feedback

True/False
Question
Some equipments are patented so manufacturing of spares is possible.
Correct Answer
False
Your Answer
True

Multiple Choice Multiple Answer
Question
Where CPM can be used?
Correct Answer
In Construction Business , In Research & Development Projects , Launching new products in Marketing
Your Answer
In Construction Business , In Research & Development Projects , Launching new products in Marketing

Multiple Choice Single Answer
Question
Which factor affects the safety of plant & people working in & around it?
Correct Answer
Accident
Your Answer
Accident

Multiple Choice Single Answer
Question
What is the requirement of effective & timely maintenance?
Correct Answer
Organizational Support
Your Answer
Organizational Support

Multiple Choice Multiple Answer
Question
First aid can be given in following accidents :-
Correct Answer
Steam burns , Chemical spilling
Your Answer
Steam burns , Chemical spilling , Cold Burning

Multiple Choice Multiple Answer
Question
High quality of workmanship helps maintenance people :-
Correct Answer
For boosting Morale of Maintenance People , In Identification of efficient workers , Rewarding Efficient Workers
Your Answer
To do Maintenance Planning , For boosting Morale of Maintenance People , Rewarding Efficient Workers

Multiple Choice Single Answer
Question
Negotiation of the price also includes :-
Correct Answer
Variation of the price
Your Answer
Exchange rates

Multiple Choice Multiple Answer
Question
Following equipment must be tested for correct load bearing capacity :-
Correct Answer
Scaffolding , Ladder , Platform
Your Answer
Ladder , Platform , Security gate

Multiple Choice Single Answer
Question
Generally insurance spare parts are purchased :-
Correct Answer
Along with original equipment
Your Answer
Along with original equipment

Multiple Choice Single Answer
Question
In any organization generally called thankless department is :-
Correct Answer
Maintenance
Your Answer
Maintenance

Multiple Choice Multiple Answer
Question
Which of the following are diagnostic instruments normally used in maintenance engineering?
Correct Answer
Pocket Thermometer , Ultrasonic Hardness Testing , Static Meter
Your Answer
Pocket Thermometer , Ultrasonic Hardness Testing , Static Meter

True/False
Question
Use of fine water spray is very wrong way of fire extinguishing.
Correct Answer
False
Your Answer
False

Select The Blank
Question
In the Start up of plant phase, plant is subjected to ________ where water being used in place of process fluid.
Correct Answer
Water trial
Your Answer
Leak trial

Multiple Choice Single Answer
Question
How steam act as cooling agent to extinguishing fire?
Correct Answer
Absorbs heat from fire
Your Answer
Create a Foam

Select The Blank
Question
The efforts are made to reduce time/effort required in carrying out maintenance work is ________.
Correct Answer
Design-in-maintenance
Your Answer
Maintenance

Select The Blank
Question
Reliability can be expressed as probability between________.
Correct Answer
0 to 1
Your Answer
0 to 1

Select The Blank
Question
It is estimated that during first year the maintenance cost may approximately about ________ more than the normal cost during subsequent years.
Correct Answer
0.2
Your Answer
0.2

True/False
Question
Calibration is an important function of maintenance manager.
Correct Answer
True
Your Answer
True

Select The Blank
Question
The ________ is done to check performance efficiency of a plant.
Correct Answer
Technological Review
Your Answer
Control Quality

True/False
Question
The operating cost of the equipment is also important factor for the decision making.
Correct Answer
True
Your Answer
True

Match The Following
Question
Correct Answer
Your Answer
Maintenance schedule
Schedule of over
Schedule of over
Technical data
Drawings
Drawings
Technical specification
Technical description
Technical description
Handling Instruction
Transportation
Movement data

Match The Following
Question
Correct Answer
Your Answer
Factory building
Cross ventilation
Proper Insulation
Foreign origin equipment
Manual translation into English
Better performance/reliability
Non standard spare parts
Maximum lead time
Installation too costly
Steam piping
Proper Insulation
Cross ventilation

True/False
Question
The budgetary control is planned to assist the management in the allocation of responsibility and authority to aid in making estimates and plans for the future.
Correct Answer
True
Your Answer
True

Multiple Choice Single Answer
Question
To avoid accidents & to have proper staff training, supplier must ensure that :-
Correct Answer
Complete technical help is supplied in writing to the plant engineers.
Your Answer
Complete technical help is supplied in writing to the plant engineers.

Multiple Choice Multiple Answer
Question
Which of the following are metal working oils?
Correct Answer
Soluble cutting oil , Synthetic cutting oil , Srip grinding oil
Your Answer
Soluble cutting oil , Synthetic cutting oil , Srip grinding oil

Select The Blank
Question
All ________ requirements by various government authorities must be followed.
Correct Answer
Recommended
Your Answer
Statutory

True/False
Question
Computers can be used to predict failures and breakdowns by simulation method well in advance.
Correct Answer
True
Your Answer
False

Multiple Choice Single Answer
Question
As maintenance involves Time & Money, recordings of it is important. These records are known as :-
Correct Answer
Maintenance Record
Your Answer
System Records

Legal Aspects of Finance - 35

Legal Aspects of Finance - 34

Legal Aspects of Finance - 33

Legal Aspects of Finance - 32

True/False
Question	Three parties can not enter into an agreement.
Correct Answer	FALSE
Select The Blank
Question	Karta of Joint-Hindu family is ________ of his family.
Correct Answer	Representative
Multiple Choice Single Answer
Question	In an auction sale, if someone gives highest bid and the auctioneer accepts his offer by striking the hammer it is :-
Correct Answer	An implied acceptance
Multiple Choice Multiple Answer
Question	The principal must give compensation to his agent in respect of injury caused to an agent by the :-
Correct Answer	Principal's neglect , Principal's want to skill , Principal's want to knowledge
Select The Blank
Question	Dissolution of partnership involves a change in ________ of partners.
Correct Answer	Relationship
True/False
Question	If a bearer cheque is lost or stolen, the owner of such a cheque is put to the loss.
Correct Answer	TRUE
Select The Blank
Question	All illegal agreements are ________ but all Void agreements are not illegal.
Correct Answer	Void
Multiple Choice Multiple Answer
Question	A Consumer has the following rights :-
Correct Answer	To get the education of the availability of legal remedies , Seek redressal against unfair trade practices , To be informed about quality, quantity, potency, purity, standard and price of goods
Multiple Choice Single Answer
Question	Where the partners agree to carry on the business for a definite period of time, the partnership is said to be :-
Correct Answer	For a fixed period
Multiple Choice Multiple Answer
Question	Following are the characteristics of the partnership at will :-
Correct Answer	Partners are always free to break their relationship at their will , It is for indefinite period , No provision for determination or termination of the partnership
Multiple Choice Single Answer
Question	For the formation of the contract of sale of goods, there should be :-
Correct Answer	Two parties
Select The Blank
Question	The contract of agency between the principal and his agent is ________.
Correct Answer	Enforceable
Select The Blank
Question	Unfair trade practice includes a representation made to public in a form that purports to be a ________ of a product.
Correct Answer	Warranty
True/False
Question	An agent does not have the right to stop goods in transit.
Correct Answer	FALSE
Multiple Choice Multiple Answer
Question	An unpaid seller has a :-
Correct Answer	Right against the goods
Multiple Choice Single Answer
Question	A Company, when registered with limited liability under the Companies Act 1956, shall be deemed to be a company :-
Correct Answer	Limited by shares
Select The Blank
Question	A person under any legal or natural ________ can not appoint an agent.
Correct Answer	Disability
Multiple Choice Single Answer
Question	Following is an implied condition :-
Correct Answer	Condition as to title
Multiple Choice Multiple Answer
Question	A sale can be in case of :-
Correct Answer	Specific goods , Existing goods
Select The Blank
Question	Substitution of a new contract in the place of the old one means ________.
Correct Answer	Novation
True/False
Question	The social or the domestic contracts are excluded from the purview of the Indian Contract Act, 1872.
Correct Answer	TRUE
True/False
Question	The subscriber of the memorandum of a company on its registration shall be entered in the register of members as member.
Correct Answer	TRUE
Multiple Choice Single Answer
Question	The seller can file a suit against the buyer for the price of goods only after :-
Correct Answer	The property in goods is transferred to the buyer
Multiple Choice Single Answer
Question	A partnership firm does not enjoy the status of a :-
Correct Answer	Legal person
True/False
Question	The liability of the drawer of a Bill of Exchange is primary and absolute.
Correct Answer	FALSE
True/False
Question	Partnership is a species (extension) of law of agency.
Correct Answer	TRUE
Select The Blank
Question	Unpaid seller's Right to stop the goods in transit arises only when the buyer is ________
Correct Answer	Bankrupt
Select The Blank
Question	An agent can be held responsible for damages arising from his misconduct in the business of agency or ________.
Correct Answer	Promise
Select The Blank
Question	A ________ partner is like an undisclosed principal.
Correct Answer	Sleeping
Multiple Choice Single Answer
Question	Consensus ad idem means :-
Correct Answer	Meeting of minds