LIST OF ATTEMPTED QUESTIONS AND ANSWERS
Match The Following
Question
Correct Answer
Your Answer
Repair Maintenance Course
Principles of Equipments
Chars & reports
Safety course
Nature of Accidents
Nature of Accidents
Computer training
Terminology
Terminology
Staff Development courses
Hierarchy in the organisation
Hierarchy in the organisation
True/False
Question
In the drawing of machinery both views to be shown.
Correct Answer
True
Your Answer
True
True/False
Question
Efficiency of any machine not exceed 50%.
Correct Answer
False
Your Answer
False
Multiple Choice Single Answer
Question
It is objective of maintenance to make maximum availability of production plant at :-
Correct Answer
Minimum cost
Your Answer
Minimum cost
Select The Blank
Question
If the job performed on the purchased equipment is OK in terms of quality & quantity, which was conceived at the beginning is known as ________.
Correct Answer
Proving
Your Answer
Proving
True/False
Question
Technology review is done to check the performance efficiency of plant.
Correct Answer
True
Your Answer
True
True/False
Question
The value analysis takes into account the used value and esteem value.
Correct Answer
True
Your Answer
True
True/False
Question
The supervisor must have good knowledge of his job, he should be able to lead by example.
Correct Answer
True
Your Answer
True
Multiple Choice Single Answer
Question
Cracks developed in machine parts is :-
Correct Answer
Mechanical Variable
Your Answer
Process variable
Multiple Choice Single Answer
Question
Which is considered as main job of a supervisor?
Correct Answer
To train subordinate
Your Answer
To motivate
Multiple Choice Multiple Answer
Question
From the following identify the spares :-
Correct Answer
Fuse , Relay , Nut & bolts
Your Answer
Fuse , Relay , Nut & bolts
Match The Following
Question
Correct Answer
Your Answer
Objective of control of spare part
Control over the consumption of spare
Control over the consumption of spare
Reconditioning of the spare part
Recycling of lubrication oil reusing waste water
Recycling of lubrication oil reusing waste water
Standardization
Bearing, V belts, flat belts
Bearing, V belts, flat belts
Codification of spare part
Equipment code number to which it belongs
Equipment code number to which it belongs
Select The Blank
Question
In the industry major hazards which can occur is ________.
Correct Answer
Explosions
Your Answer
Explosions
Select The Blank
Question
________ & maintenance department are closely interlinked to each other.
Correct Answer
Production
Your Answer
Production
Multiple Choice Multiple Answer
Question
The performance of maintenance is indicated by :-
Correct Answer
Low cost , Low down time , More uptime
Your Answer
Low cost , Low down time , More uptime
Multiple Choice Single Answer
Question
The responsibility of maintenance Department is to ensure cost at :-
Correct Answer
Minimum
Your Answer
Minimum
True/False
Question
Technical manual is not a product support document.
Correct Answer
False
Your Answer
False
True/False
Question
On line inspection is carried out on machine itself but when it is shut down.
Correct Answer
False
Your Answer
False
Multiple Choice Multiple Answer
Question
Which of the following are metal working oils?
Correct Answer
Soluble cutting oil , Synthetic cutting oil , Srip grinding oil
Your Answer
Soluble cutting oil , Synthetic cutting oil , Srip grinding oil
Multiple Choice Multiple Answer
Question
The following costs can be treated under the heads of Wages and salaries :-
Correct Answer
The salaries of foreman, fitters, electricians etc. , Overtime charges. , Contract labor charges.
Your Answer
The salaries of foreman, fitters, electricians etc. , Overtime charges. , Contract labor charges.
Multiple Choice Single Answer
Question
What is more important while using components like nut bolts, screws?
Correct Answer
Standardization
Your Answer
Standardization
Multiple Choice Single Answer
Question
Name the book in which complete inventory of the buildings and plant is maintained?
Correct Answer
Assets Register
Your Answer
Assets Register
Multiple Choice Single Answer
Question
The wear-in period which occurs during initial working period, experiences lot of maintenance problems is also called :-
Correct Answer
Teething problems
Your Answer
Teething problems
Multiple Choice Single Answer
Question
Negotiation of the price also includes :-
Correct Answer
Variation of the price
Your Answer
Variation of the price
Select The Blank
Question
Value analysis applies ________ approach to find out unnecessary cost.
Correct Answer
Creative
Your Answer
Knowledge base
Multiple Choice Multiple Answer
Question
Development of subordinates broadly will depend on :-
Correct Answer
The level of education , The level of personal skill , The level of intelligence
Your Answer
The level of education , The level of personal skill , The level of intelligence
Select The Blank
Question
Work order release system is the ________ to start the maintenance activity at the correct frequencies.
Correct Answer
Trigger
Your Answer
Trigger
True/False
Question
Electrical energy is the most commonly used form of energy.
Correct Answer
True
Your Answer
True
Select The Blank
Question
The maintenance earns profit by________.
Correct Answer
Zero Faults
Your Answer
Zero Faults
Select The Blank
Question
There are ________ chemicals which are in common use.
Correct Answer
60000
Your Answer
60000
Select The Blank
Question
In ________ phase the plant is observed for any indications of defects.
Correct Answer
Post overhaul
Your Answer
Post overhaul
Multiple Choice Multiple Answer
Question
In Maintenance Control Model following things are very important :-
Correct Answer
Lubrication Schedule , Preventive Maintenance , Inspection Schedule
Your Answer
Lubrication Schedule , Preventive Maintenance , Inspection Schedule
Multiple Choice Single Answer
Question
Overtime working of operator make them less alert mentally & physically, this may cause :-
Correct Answer
Accident
Your Answer
Accident
Select The Blank
Question
A unit called ________ measures illumination.
Correct Answer
Lux
Your Answer
Lux
Multiple Choice Single Answer
Question
Team spirit, policy on line of authority help in bringing people together & work in one direction to :-
Correct Answer
Achieve goal
Your Answer
Achieve goal
Select The Blank
Question
A ________ represents basic event which needs no further investigation as sufficient information is available under fault free analysis.
Correct Answer
Circle
Your Answer
Circle
Multiple Choice Single Answer
Question
It has been found that after initial period of steam pipe laying is over :-
Correct Answer
The pipeline and various fittings like valve, taps starts leaking.
Your Answer
The pipeline and various fittings like valve, taps becomes leak proof.
Multiple Choice Multiple Answer
Question
The criticality of equipment may change with :-
Correct Answer
Time , Technology
Your Answer
Time , Technology
Multiple Choice Multiple Answer
Question
Training helps in :-
Correct Answer
Knowledge of plant , Multiskilled purpose , Reduced cost
Your Answer
Knowledge of plant , Multiskilled purpose , Reduced cost
Multiple Choice Multiple Answer
Question
Which are the major hazards which can occur in Industry?
Correct Answer
Toxicity , Radioactivity , Poisons
Your Answer
Toxicity , Radioactivity , Poisons
Multiple Choice Single Answer
Question
Identify the insurance spares from the following :-
Correct Answer
Hydraulic pump of press machine
Your Answer
Hydraulic pump of press machine
Multiple Choice Single Answer
Question
It is said that a failure never occurs without :-
Correct Answer
Warnings
Your Answer
Warnings
True/False
Question
The operating cost of the equipment is also important factor for the decision making.
Correct Answer
True
Your Answer
True
Select The Blank
Question
________ should be allowed in case of real emergency.
Correct Answer
Contingency purchasing
Your Answer
Special purchasing
Multiple Choice Multiple Answer
Question
Which type of lubricating oil & greases is available in market?
Correct Answer
Automotive lubricating oil , Railroad oils , Industrial lubricating oil
Your Answer
Automotive lubricating oil , Railroad oils , Industrial lubricating oil
Multiple Choice Multiple Answer
Question
In condition based maintenance which equipments are used?
Correct Answer
Flexiscope , Radiography , Thermal Tester
Your Answer
Flexiscope , Radiography , Thermal Tester
True/False
Question
Too may cooks spoil the broth.
Correct Answer
True
Your Answer
True
1. Use of electrical motors
1. Must be close to unity
2. Power factor
2. Minimize of core losses
3. Transformer maintenance
3. Should get maximum attention
4. On load tap changer
4. Should be above unity
5. Reduces input voltage fluctuation
6. Is not an important factor
Match The Following
Question
Correct Answer
Your Answer
Repair Maintenance Course
Principles of Equipments
Chars & reports
Safety course
Nature of Accidents
Nature of Accidents
Computer training
Terminology
Terminology
Staff Development courses
Hierarchy in the organisation
Hierarchy in the organisation
True/False
Question
In the drawing of machinery both views to be shown.
Correct Answer
True
Your Answer
True
True/False
Question
Efficiency of any machine not exceed 50%.
Correct Answer
False
Your Answer
False
Multiple Choice Single Answer
Question
It is objective of maintenance to make maximum availability of production plant at :-
Correct Answer
Minimum cost
Your Answer
Minimum cost
Select The Blank
Question
If the job performed on the purchased equipment is OK in terms of quality & quantity, which was conceived at the beginning is known as ________.
Correct Answer
Proving
Your Answer
Proving
True/False
Question
Technology review is done to check the performance efficiency of plant.
Correct Answer
True
Your Answer
True
True/False
Question
The value analysis takes into account the used value and esteem value.
Correct Answer
True
Your Answer
True
True/False
Question
The supervisor must have good knowledge of his job, he should be able to lead by example.
Correct Answer
True
Your Answer
True
Multiple Choice Single Answer
Question
Cracks developed in machine parts is :-
Correct Answer
Mechanical Variable
Your Answer
Process variable
Multiple Choice Single Answer
Question
Which is considered as main job of a supervisor?
Correct Answer
To train subordinate
Your Answer
To motivate
Multiple Choice Multiple Answer
Question
From the following identify the spares :-
Correct Answer
Fuse , Relay , Nut & bolts
Your Answer
Fuse , Relay , Nut & bolts
Match The Following
Question
Correct Answer
Your Answer
Objective of control of spare part
Control over the consumption of spare
Control over the consumption of spare
Reconditioning of the spare part
Recycling of lubrication oil reusing waste water
Recycling of lubrication oil reusing waste water
Standardization
Bearing, V belts, flat belts
Bearing, V belts, flat belts
Codification of spare part
Equipment code number to which it belongs
Equipment code number to which it belongs
Select The Blank
Question
In the industry major hazards which can occur is ________.
Correct Answer
Explosions
Your Answer
Explosions
Select The Blank
Question
________ & maintenance department are closely interlinked to each other.
Correct Answer
Production
Your Answer
Production
Multiple Choice Multiple Answer
Question
The performance of maintenance is indicated by :-
Correct Answer
Low cost , Low down time , More uptime
Your Answer
Low cost , Low down time , More uptime
Multiple Choice Single Answer
Question
The responsibility of maintenance Department is to ensure cost at :-
Correct Answer
Minimum
Your Answer
Minimum
True/False
Question
Technical manual is not a product support document.
Correct Answer
False
Your Answer
False
True/False
Question
On line inspection is carried out on machine itself but when it is shut down.
Correct Answer
False
Your Answer
False
Multiple Choice Multiple Answer
Question
Which of the following are metal working oils?
Correct Answer
Soluble cutting oil , Synthetic cutting oil , Srip grinding oil
Your Answer
Soluble cutting oil , Synthetic cutting oil , Srip grinding oil
Multiple Choice Multiple Answer
Question
The following costs can be treated under the heads of Wages and salaries :-
Correct Answer
The salaries of foreman, fitters, electricians etc. , Overtime charges. , Contract labor charges.
Your Answer
The salaries of foreman, fitters, electricians etc. , Overtime charges. , Contract labor charges.
Multiple Choice Single Answer
Question
What is more important while using components like nut bolts, screws?
Correct Answer
Standardization
Your Answer
Standardization
Multiple Choice Single Answer
Question
Name the book in which complete inventory of the buildings and plant is maintained?
Correct Answer
Assets Register
Your Answer
Assets Register
Multiple Choice Single Answer
Question
The wear-in period which occurs during initial working period, experiences lot of maintenance problems is also called :-
Correct Answer
Teething problems
Your Answer
Teething problems
Multiple Choice Single Answer
Question
Negotiation of the price also includes :-
Correct Answer
Variation of the price
Your Answer
Variation of the price
Select The Blank
Question
Value analysis applies ________ approach to find out unnecessary cost.
Correct Answer
Creative
Your Answer
Knowledge base
Multiple Choice Multiple Answer
Question
Development of subordinates broadly will depend on :-
Correct Answer
The level of education , The level of personal skill , The level of intelligence
Your Answer
The level of education , The level of personal skill , The level of intelligence
Select The Blank
Question
Work order release system is the ________ to start the maintenance activity at the correct frequencies.
Correct Answer
Trigger
Your Answer
Trigger
True/False
Question
Electrical energy is the most commonly used form of energy.
Correct Answer
True
Your Answer
True
Select The Blank
Question
The maintenance earns profit by________.
Correct Answer
Zero Faults
Your Answer
Zero Faults
Select The Blank
Question
There are ________ chemicals which are in common use.
Correct Answer
60000
Your Answer
60000
Select The Blank
Question
In ________ phase the plant is observed for any indications of defects.
Correct Answer
Post overhaul
Your Answer
Post overhaul
Multiple Choice Multiple Answer
Question
In Maintenance Control Model following things are very important :-
Correct Answer
Lubrication Schedule , Preventive Maintenance , Inspection Schedule
Your Answer
Lubrication Schedule , Preventive Maintenance , Inspection Schedule
Multiple Choice Single Answer
Question
Overtime working of operator make them less alert mentally & physically, this may cause :-
Correct Answer
Accident
Your Answer
Accident
Select The Blank
Question
A unit called ________ measures illumination.
Correct Answer
Lux
Your Answer
Lux
Multiple Choice Single Answer
Question
Team spirit, policy on line of authority help in bringing people together & work in one direction to :-
Correct Answer
Achieve goal
Your Answer
Achieve goal
Select The Blank
Question
A ________ represents basic event which needs no further investigation as sufficient information is available under fault free analysis.
Correct Answer
Circle
Your Answer
Circle
Multiple Choice Single Answer
Question
It has been found that after initial period of steam pipe laying is over :-
Correct Answer
The pipeline and various fittings like valve, taps starts leaking.
Your Answer
The pipeline and various fittings like valve, taps becomes leak proof.
Multiple Choice Multiple Answer
Question
The criticality of equipment may change with :-
Correct Answer
Time , Technology
Your Answer
Time , Technology
Multiple Choice Multiple Answer
Question
Training helps in :-
Correct Answer
Knowledge of plant , Multiskilled purpose , Reduced cost
Your Answer
Knowledge of plant , Multiskilled purpose , Reduced cost
Multiple Choice Multiple Answer
Question
Which are the major hazards which can occur in Industry?
Correct Answer
Toxicity , Radioactivity , Poisons
Your Answer
Toxicity , Radioactivity , Poisons
Multiple Choice Single Answer
Question
Identify the insurance spares from the following :-
Correct Answer
Hydraulic pump of press machine
Your Answer
Hydraulic pump of press machine
Multiple Choice Single Answer
Question
It is said that a failure never occurs without :-
Correct Answer
Warnings
Your Answer
Warnings
True/False
Question
The operating cost of the equipment is also important factor for the decision making.
Correct Answer
True
Your Answer
True
Select The Blank
Question
________ should be allowed in case of real emergency.
Correct Answer
Contingency purchasing
Your Answer
Special purchasing
Multiple Choice Multiple Answer
Question
Which type of lubricating oil & greases is available in market?
Correct Answer
Automotive lubricating oil , Railroad oils , Industrial lubricating oil
Your Answer
Automotive lubricating oil , Railroad oils , Industrial lubricating oil
Multiple Choice Multiple Answer
Question
In condition based maintenance which equipments are used?
Correct Answer
Flexiscope , Radiography , Thermal Tester
Your Answer
Flexiscope , Radiography , Thermal Tester
True/False
Question
Too may cooks spoil the broth.
Correct Answer
True
Your Answer
True
1. Use of electrical motors
1. Must be close to unity
2. Power factor
2. Minimize of core losses
3. Transformer maintenance
3. Should get maximum attention
4. On load tap changer
4. Should be above unity
5. Reduces input voltage fluctuation
6. Is not an important factor
No comments:
Post a Comment